Panacci Plumbing Ltd. (905) 536-3703

Sump pump installation & repair

A sump pump sits in a pit at the lowest point of your basement and pumps out groundwater before it can flood the floor. Panacci Plumbing installs new sump pumps, replaces worn-out ones, adds battery backups and repairs pumps that stop working in Hamilton, Burlington, Oakville, Milton and the Niagara Region, 24 hours a day.

Call (905) 536-3703 Get a free estimate

Signs your sump pump needs attention

  • The pump doesn't turn on when the pit fills with water
  • It runs constantly, or turns on and off every few seconds
  • Grinding, rattling or loud humming noises
  • Rust, corrosion or a bad smell coming from the pit
  • Water on the basement floor near the pit after rain
  • The pump is getting old, or you don't know how old it is
Pump pit with two new pumps, float switches and discharge piping installed by Panacci Plumbing
A two-pump pit with new discharge piping and float controls.

Sump pump services

New installations

A new pit, pump, check valve and discharge line for homes that don't have one yet.

Replacements

Swapping out old or failing pumps before they quit in a storm.

Battery backups

A second pump that keeps running when the power goes out.

Repairs

Stuck float switches, failed check valves and pumps that won't start.

New pump pit with two pumps, check valves and grey PVC discharge piping
Two pumps and new discharge piping in a fresh pit.
Two green submersible pumps with galvanized discharge piping and valves on a commercial job
A two-pump setup for a commercial building.

How to test your sump pump

  1. Check the power. Make sure the pump is plugged in and the outlet works.
  2. Add water. Slowly pour a bucket of water into the pit.
  3. Watch it run. The float should rise, the pump should turn on and empty the pit, then shut off on its own.
  4. Check outside. Make sure water is coming out of the discharge line and draining away from the house.

Pump failed during a storm? Call us 24/7 at (905) 536-3703. Unplug the pump before touching anything in the pit.

FAQ

Sump Pumps: common questions

How long does a sump pump last?

Many sump pumps last around 7 to 10 years, depending on how often they run and how well they're maintained. Test yours regularly, and plan to replace an older pump before it fails during a storm.

How do I test my sump pump?

Slowly pour a bucket of water into the sump pit. The float should rise, the pump should turn on and empty the pit, then shut off on its own. If it doesn't start, runs but doesn't drain, or won't shut off, call a plumber.

Do I need a battery backup sump pump?

It's strongly recommended, especially if your basement is finished. Power outages often happen during the same storms that push the most water into the pit, and a standard pump can't run without power.

Why is my sump pump running constantly?

Common causes include a high water table after heavy rain, a stuck float switch, a failed check valve letting water flow back into the pit, or a pump that's too small for the amount of water. A pump that never stops will wear out quickly, so have it checked.

Is a sump pump the same as a backwater valve?

No. A sump pump removes groundwater from around your foundation. A backwater valve stops sewage from flowing back into your home through the sewer line. They protect against different kinds of flooding.

Related services

Other ways we can help.

Backwater Valves

Stop sewage from backing up into your basement during heavy storms.

Learn more →

Drain Cleaning

Clogged sinks, toilets, tubs, floor drains and main lines cleared fast, any hour.

Learn more →

Plumbing Rough-Ins

Drain, vent and water lines for basements, additions, renos and new builds.

Learn more →

Urgent plumbing problem?

Call our 24-hour emergency line.

Friendly emergency plumbing services, any hour, any day.

(905) 536-3703
Tap to call · 24/7